Tension Bridging
DESIGN FEATURES: Provide the builder with an inexpensive, nail-type bridging for truss type I-joists. There are nine lengths from which to choose. All have seven nail holes per end, two of which must be used (4-10d).
LXB is used with 2x8 and 2x10 joists. There are six nail holes in each end. Only two nails are required for each end. 2 to 3 times faster installation than wood bridging.
MATERIAL: 22 ga. galvanized steel
Product Detail
- LXB20
- LXB40
- LXB Installation
Load Table
