Window Flashing
Custom sizes available to fit your specifications !
Product Detail
Design Features
Window flashing provides an easy to install and long-lasting method of
stopping water penetration. Used over window trim, band boards, panel intersections, and other vertical surfaces.
stopping water penetration. Used over window trim, band boards, panel intersections, and other vertical surfaces.
Installation
After installing the window, cut and install a 1/4” thick shim above the
window. The shim should be the same width as the trim, and it should be
as long as the top or header piece of trim. Over the shim install window flashing that is wide enough to allow for
the thickness of the trim. Install the panel or lap siding to the window and around the shim taking
care not to damage the window flashing and leaving a 1/4” gap between
the panel or lap siding and the horizontal part of the flashing. Install the trim around the window, slipping the head piece under the
installed window flashing.
Material
3105-type aluminum sheet coated on both sides with Dymalar® 2000 paint
system that is specifically formulated for residential exterior applications.