XCAC

XtremeCoat

PROPERTIESVALUE
COLORWhite/Grey (other colors available on request)
MIXED DENSITY, (G/L)1.1±0.05
SOLID CONTENT, (%)65±2
POT LIFE, (HRS)6
VOC, (G/L)<10
TOUCH DRY TIME, (MINS)25
INITIAL CURE TIME, (MINS)60
FULL CURE, (HRS)24
TENSILE STRENGTH, (N, MM²) ≥2.5
ELONGATION, (%)≥250
TEAR STRENGTH, (N, MM)≥10
SOLAR REFLECTION, (%) (WHITE) ≥75
SHORE A HARDNESS45
WATER VAPOR TRANSMISSION, (PERMS)6
ADHESION STRENGTH, (N, MM²)≥2.5
CRACKING BRIDGING ABILITY, (MM)≥2
APPLICATION TEMPERATURE, (°C)5 to 45
SERVICE TEMPERATURE, (°C)-5 to 70
Tamlyn® XtremeCOAT is an all climate, high strength, two-component fast curing, hybrid Urethane roof coating. XtremeCOAT is a low viscosity highly penetrative coating which upon curing forms a flexible membrane, making it highly suitable for all types of waterproofing applications on various substrates. XtremeCOAT has excellent adhesion on all suggested substrates an can also be applied on wet and damp surfaces.

FEATURES/BENEFITS:
• Resistant to UV degradation
• High mechanical properties
• Universal water proofing solution
• Fast curing time (60 mins at 77°F)
• Permanent solution under ponding water
• Exceptional elongation and tensile strength
• Excellent adhesion on wet & damp substrates
• Low VOC: Non-hazardous & environmentally friendly
• Permanent solution for above/below grade areas including water features, walkways, swimming pools & retaining walls
• Can be subjected to light foot traffic after full cure (7 days)

STORAGE LIFE: 12 months when stored in unopened conditions.

COLORS AVAILABLE: White

USES: Product can be applied on Concrete, Metal, SPF, EPDM, PVC, TPO, Clay Roof tiles, Plywood, Smooth BUR and Cap Sheet Substrates

APPLICATION: Product shall be applied in minimum of 2 coats. Apply The first coat of Product on all areas with a brush / roller or spray at a coverage rate of 1.5 gallons/square. Dry Film Thickness (DFT) should be minimum of 22 mils.

Apply the second coat in a perpendicular direction to the previous coat after the previous coat dries off. Allow at least four hours between coats and 24–48 hours for full cure, dependent upon weather conditions. Relative humidity will directly affect drying curing time. Avoid over application. Application rates should be adjusted to meet each particular roofs specified requirements. Coverage rates are theoretical and do not take into account material loss due to surface texture.

WARRANTY INFORMATION
XCAC

XtremeCoat

Tamlyn® XtremeCOAT is an all climate, high strength, two-component fast curing, hybrid Urethane roof coating. XtremeCOAT is a low viscosity highly penetrative coating which upon curing forms a flexible membrane, making it highly suitable for all types of waterproofing applications on various substrates. XtremeCOAT has excellent adhesion on all suggested substrates an can also be applied on wet and damp surfaces.

FEATURES/BENEFITS:
• Resistant to UV degradation
• High mechanical properties
• Universal water proofing solution
• Fast curing time (60 mins at 77°F)
• Permanent solution under ponding water
• Exceptional elongation and tensile strength
• Excellent adhesion on wet & damp substrates
• Low VOC: Non-hazardous & environmentally friendly
• Permanent solution for above/below grade areas including water features, walkways, swimming pools & retaining walls
• Can be subjected to light foot traffic after full cure (7 days)

STORAGE LIFE: 12 months when stored in unopened conditions.

COLORS AVAILABLE: White

USES: Product can be applied on Concrete, Metal, SPF, EPDM, PVC, TPO, Clay Roof tiles, Plywood, Smooth BUR and Cap Sheet Substrates

APPLICATION: Product shall be applied in minimum of 2 coats. Apply The first coat of Product on all areas with a brush / roller or spray at a coverage rate of 1.5 gallons/square. Dry Film Thickness (DFT) should be minimum of 22 mils.

Apply the second coat in a perpendicular direction to the previous coat after the previous coat dries off. Allow at least four hours between coats and 24–48 hours for full cure, dependent upon weather conditions. Relative humidity will directly affect drying curing time. Avoid over application. Application rates should be adjusted to meet each particular roofs specified requirements. Coverage rates are theoretical and do not take into account material loss due to surface texture.

WARRANTY INFORMATION

PROPERTIESVALUE
COLORWhite/Grey (other colors available on request)
MIXED DENSITY, (G/L)1.1±0.05
SOLID CONTENT, (%)65±2
POT LIFE, (HRS)6
VOC, (G/L)<10
TOUCH DRY TIME, (MINS)25
INITIAL CURE TIME, (MINS)60
FULL CURE, (HRS)24
TENSILE STRENGTH, (N, MM²) ≥2.5
ELONGATION, (%)≥250
TEAR STRENGTH, (N, MM)≥10
SOLAR REFLECTION, (%) (WHITE) ≥75
SHORE A HARDNESS45
WATER VAPOR TRANSMISSION, (PERMS)6
ADHESION STRENGTH, (N, MM²)≥2.5
CRACKING BRIDGING ABILITY, (MM)≥2
APPLICATION TEMPERATURE, (°C)5 to 45
SERVICE TEMPERATURE, (°C)-5 to 70

Quick Installation Guide

We know that a smooth installation is key to getting the most out of our products. You'll find detailed, easy-to-follow instructions and helpful tips to ensure a hassle-free project from start to finish.

Technical Documents

Need in-depth information? Our Technical Documents section is your go-to resource for detailed specifications, guides, and comprehensive technical data.

Explore Our Video Archives

Curious to learn more? Don't forget to visit our Video Archives section, where you'll find a wealth of helpful tutorials, product demonstrations, and insightful content.